The Pentek EP-10 Carbon Briquette water filter cartridge reduces the unappealing taste and odor of chlorine from your water. Its unique Endurawrap design is also highly effective at reducing dirt and debris in your water, without compromising the filter life through premature plugging from particulate matter. The EP-10 is a great option for better drinking water in a countertop or undersink system, directly at the point of use where you want clean, crisp refreshment. The filter cartridge materials are tested and certified by NSF International to NSF/ANSI Standard 42.
Frequently Asked Questions
What is the micron rating of the Pentek EP-10 filter cartridge?
The Pentek EP-10 is a carbon block filter cartridge with a 5-micron nominal rating. This tight micron rating allows it to effectively reduce chlorine taste and odor while also filtering out fine sediment, rust, dirt, and scale particles from your drinking water. The EP-10 is ideal for point-of-use applications where both chemical reduction and particulate filtration are needed.
How long does the Pentek EP-10 cartridge last, and when should it be replaced?
The Pentek EP-10 has a rated capacity of 2,000 gallons, but for optimal performance Pentair recommends replacing the cartridge every 6 months or sooner if you notice a decrease in flow rate or a return of chlorine taste and odor. The standard 9-3/4″ x 2-7/8″ size fits most standard 10-inch housings, making replacement quick and easy.
Is the Pentek EP-10 NSF certified?
Yes, the Pentek EP-10 is tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements and chlorine taste and odor reduction. It is manufactured from FDA-compliant materials, making it safe for use in residential drinking water systems, food service applications, and commercial beverage dispensing equipment.
What contaminants does the Pentek EP-10 reduce?
The Pentek EP-10 Bonded Carbon Block cartridge is engineered to reduce chlorine taste and odor, sediment, rust, dirt, scale, and other particulates down to 5 microns. Its bonded carbon block construction provides greater surface area and contact time compared to loose granular activated carbon filters, delivering more consistent contaminant reduction throughout the life of the cartridge without channeling or bypass.
What is the flow rate and operating range of the Pentek EP-10?
The Pentek EP-10 has a maximum service flow rate of 2 GPM (gallons per minute) with an initial pressure drop of less than 4 PSI. It operates within a temperature range of 40°F to 100°F (4.4°C to 37.8°C) and a maximum pressure of 125 PSI. These specifications make it well-suited for whole-house pre-filtration, under-sink drinking water systems, and light commercial applications.
