3M Aqua-Pure AP717 Inline Water Filter System fits any 1/4-inch plastic or copper water line. In-line water filtration systems are great solutions when a refrigerator does not have a pre-existing water filter. The filter reduces sediment, chlorine taste and odor and scale from your drinking water. It has a filtration level down to 5 micron. Provide better drinking water at your convenience by ordering the Aqua-Pure AP717 Inline water filter.
Frequently Asked Questions
What is the micron rating and filtration capacity of the 3M Aqua-Pure AP717 inline water filter?
The 3M Aqua-Pure AP717 features a 5-micron nominal filtration rating, effectively reducing sediment, chlorine taste and odor, and fine particulates from your water supply. It has a rated capacity of up to 1,500 gallons or a service life of approximately 12 months, whichever comes first. This makes the AP717 ideal for icemakers, refrigerators, coffee makers, and other point-of-use appliances where consistent, high-quality filtered water is required.
How do I install the Aqua-Pure AP717 inline filter on my refrigerator or icemaker?
The AP717 is designed for quick and easy installation with its built-in 1/4-inch push-in quick-connect fittings on both ends, eliminating the need for extra adapters or tools. Simply shut off the water supply, cut the 1/4-inch water line between your shut-off valve and your appliance, and push both ends of the tubing firmly into the AP717 fittings. Turn the water back on, check for leaks, and flush 2–3 gallons through the filter before use to remove any carbon fines.
Is the 3M Aqua-Pure AP717 NSF/ANSI certified?
Yes, the Aqua-Pure AP717 is tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine taste and odor as well as particulate (Class III) reduction. This certification assures you that the filter meets strict third-party standards for material safety, structural integrity, and performance claims. For additional inline filtration options, browse our full inline water filter collection.
How often should I replace the Aqua-Pure AP717 inline filter?
3M recommends replacing the AP717 every 12 months or after 1,500 gallons of use, whichever occurs first. If you notice a decrease in water flow, changes in taste, or visible discoloration before the 12-month mark, replace the filter sooner. Timely replacement prevents bacterial buildup within the carbon media and ensures your icemaker, refrigerator, or beverage equipment continues receiving clean, great-tasting water.
What are the flow rate and operating specifications of the AP717?
The Aqua-Pure AP717 operates at a maximum service flow rate of 0.75 gallons per minute (GPM), making it ideal for low-flow point-of-use applications like icemakers and refrigerator dispensers. It is rated for water pressures between 25–125 psi and temperatures from 35°F to 100°F (2°C to 38°C). Its compact 9-inch length and integrated quick-connect design allow it to fit easily behind most appliances, even in tight installation spaces.
